Project Note · 2026-11-03

We Rejected Nine Inverters Over a Meter: What That £4,600 Lesson Taught Me About Buying GoodWe Gear, Hybrid Downsides and EV Charger Quotes

A quality and brand compliance manager walks through a rejected inverter batch, a 12-day delay, three non-comparable EV charger quotes, and the honest list of hybrid inverter disadvantages he now shares with every customer before they sign.

7:40 a.m., Tuesday, 12 March 2024

The forklift had already dropped nine pallets on the bay before I got my coffee down. Nine GoodWe ET 10kW three-phase hybrids, nine Lynx Home F 9.8 batteries, and — according to the packing list — nine GM3000 three-phase meters.

I'm the quality and brand compliance manager for a solar and electrical contractor in the north of England. I check every inbound consignment before it goes to site. Roughly 340 items a year, and in 2023 I rejected about 11% of first deliveries. Most of those were labelling or paperwork. This one wasn't.

The project was a nine-unit build-to-rent block in Manchester. Three-phase supply to each unit, zero export agreed with the DNO, a G99 application because of aggregation across the block, and nine parking bays we'd specified with 11kW GoodWe HCA-G2 chargers. One ecosystem, one monitoring portal, one support line.

That last part was deliberate. In 2022 we ran a site with three brands — one inverter make, one battery make, one charger make — and spent six weeks in a three-way conversation where each manufacturer blamed the other two. That experience is the whole reason we standardised.

So when the boxes opened and the meters inside were single-phase units, I stopped the intake.

What actually went wrong, and what the vendor said

Two problems, and they compounded each other.

First, the meters. A single-phase meter on a three-phase supply can't do what we needed it to do. Export limitation is the entire basis of the DNO agreement on this site. Without the right meter, the inverters can't be configured to hold export at zero, and the commissioning certificate is meaningless.

Second, the firmware. The labels showed a build date from Q3 2023. The grid-code profile our DNO had approved for this site wasn't on the printed commissioning card. Not missing in a way that couldn't be fixed — but it meant a field firmware update on nine units, on a site with no broadband yet, using a hotspot and a laptop.

The distributor's rep was polite and, I think, genuinely surprised. His line was that the substitution was within industry standard, because the single-phase meter was a compatible accessory in the same product family.

I rejected the batch. All nine. They redid it at their cost.

That rejection cost us £4,600 — extra labour, a second commissioning visit, and a fortnight of hire on a scaffold tower we no longer needed. (Should mention: the programme had a two-week float. That float is the only reason this didn't end in a claim.)

The whole thing took twelve days to resolve — or rather, fourteen once you count the weekend the replacement pallets sat in a depot in Warrington.

The £780 I saved two years earlier that cost £1,100

I'd love to tell you this was the first time. It wasn't.

In 2022 I signed off a Friday handover without running pre-commissioning firmware updates, because the units were already on the wall and the engineer was booked elsewhere and I wanted to save the £780 in overtime.

Monday morning the inverter wouldn't accept the export limit the DNO had specified. An engineer drove 90 minutes each way, billed us £1,100 in callout and lost time, and the client watched the whole thing from her kitchen window. Saved £780. Spent £1,100. Net loss, plus a relationship.

Cheap is expensive. I know that sounds like something you'd read on a mug, but I have the invoice to prove it.

The assumption that actually caused the meter mix-up

Here's the part I'm least proud of. I assumed that ET 10kW meant one thing — one hardware revision, one accessory kit, one configuration.

It doesn't. There are revisions. There are regional accessory packs. There are bundled-meter and no-meter SKUs. And if your purchase order says ET 10kW x9 and nothing else, you have given the warehouse a menu, not an instruction.

I learned never to assume a model number pins the accessory list after watching nine boxes of the wrong meter come off a pallet.

The fix wasn't complicated. It was tedious. Our purchase orders now carry the meter part number, the firmware baseline, the grid-code profile, the dongle or LAN module, and the CT ratio. Twelve lines instead of one. Boring. Effective.

Why we standardised on one ecosystem in the first place

I want to be fair here, because the story so far makes it sound like a brand problem. It wasn't. It was a specification problem.

When I compared our mixed-brand site against a single-ecosystem site side by side — same rough size, same client type — the difference wasn't in the hardware on the wall. It was in the phone calls.

On the mixed site, a monitoring fault meant three support tickets and a week of email. On the single-ecosystem site, it meant one ticket and someone remote-logging in. Callbacks in the twelve months after handover dropped from roughly one in four units to one in eleven. That's the number that made the decision for us, not a datasheet.

Practically, that's what the GoodWe breadth buys you: inverter, battery, EV charger, smart meter and the SEMS Portal all talking the same language, on one warranty registration, with one technical support queue. If a battery doesn't charge from PV, there's no finger-pointing committee. It's the same manufacturer.

What it doesn't buy you is protection from your own sloppy PO. Nothing does.

Then the EV charger quotes arrived

Same nine bays. Same drawing. Three quotes.

£1,120 per bay. £1,540 per bay. £1,780 per bay.

If you've ever asked which EV charger to buy off the back of three quotes like that, you'll know the problem: none of them were quoting the same thing, and only one of them said so.

The £1,120 quote assumed a 9-metre cable run and an existing spare way in the consumer unit. The actual run was 22 metres through a car park, so that quote grew by £380 before anyone picked up a drill. The £1,780 quote included an earth rod, a PEN fault device, the load-management CT clamp, DNO notification, the commissioning certificate and three years of warranty. The £1,540 one included roughly half of that.

Unit price is not the quote. On GoodWe EV charger installation quotes, the things that move the number are:

  • Cable run length and whether trenching or ducting is included
  • Earthing arrangement — TT vs TN-C-S, and whether PEN fault protection is needed
  • Load management: a CT clamp at the origin, or a supply upgrade
  • Charge point rating — 7kW single-phase, 11kW three-phase, 22kW three-phase
  • Whether it's tethered or untethered, and whether the untethered one includes a socket shutter
  • DNO notification and, where applicable, grant administration
  • Commissioning certificate and warranty length
  • Whether solar diversion from the inverter is configured or just possible in theory

In Great Britain there's also a regulatory layer people forget. The Electric Vehicles (Smart Charge Points) Regulations 2021, in force since 30 June 2022 for private charge points, require smart functionality, a default off-peak charging schedule, and a randomised delay before charging starts. Source: legislation.gov.uk. A charger that can't meet those requirements is a problem at handover, not at purchase.

Connector standards matter too — Type 2 for AC in Europe and the UK (IEC 62196-2), J1772 in North America, CCS2 for DC fast charging. And installation should follow the IET Code of Practice for Electric Vehicle Charging Equipment Installation and BS 7671, not a YouTube video from 2019.

My rule now: a quote gets rejected if it doesn't state the cable length, the earthing arrangement, the load-management method and what happens at the DNO. If those four are absent, the price is fiction.

The client who asked why not just buy an Oukitel P2001

Halfway through the Manchester job, the site manager asked me a fair question. The marketing suite had no power yet. Couldn't we just drop in a portable solar generator instead of wiring a temporary supply?

We borrowed an Oukitel P2001 solar generator and ran it for a week to find out, because I'd rather test something for seven days than argue about it for seven weeks.

Here's the honest answer. For that job, it was almost right. The unit we had was roughly a 2kWh battery with a 2kW-class AC output, LiFePO4, and a solar input well under 1kW.

It ran the router, two laptops, the LED lighting and the printer for a full working day with charge to spare. It did not enjoy a 2kW kettle and a fan heater running together — it tripped on overload, as it should. And recharging from a portable panel in a Pennine February is a slow business: you're looking at the best part of a week to go from empty to full on solar alone, assuming the sun shows up.

So: 2kWh of storage is a genuinely useful thing. It is not a substitute for a grid connection, a heat pump, or an EV charger. It cannot export, it cannot do zero-export control, it has no DNO interface, and it has no whole-house backup unless you install a transfer switch and give up on half your circuits.

Where it wins is a defined, small, portable load with no fixed wiring. Where it loses is anything that needs to run continuously, or anything over about 3kW.

One more thing worth flagging, because portable power marketing gets loose with language: environmental claims still need substantiation. The FTC's Green Guides (16 CFR Part 260) apply to terms like renewable, clean and zero emission just as much as to recyclable. Source: ftc.gov/green-guides. If a spec sheet promises something a lab can't measure, ask for the test method.

The list I now give customers: disadvantages of a hybrid inverter

The keyword that brings people to this article is disadvantages of hybrid inverter, and most of what ranks for it is either a sales page or a list written by someone who's never opened one. So here's mine, from the receiving bay.

You pay for capability you may never use. A hybrid inverter costs more than a string inverter of the same rating. If your client has no intention of adding a battery in the next five years, that premium buys hardware sitting idle.

Single point of failure. This is the big one. If a hybrid inverter goes down, you lose PV generation and battery backup in the same event. On a split system, an inverter failure still leaves the battery and the critical load circuit running. We've had exactly one hybrid go down on us in three years, and the customer noticed within twenty minutes.

Compatibility isn't universal. High-voltage hybrid inverters work with a defined battery list. Your customer's choice of battery is narrower than the marketing suggests, and that list changes with firmware and hardware revisions.

Commissioning is harder. Grid-code profiles, export limits, battery communication, meter configuration, firmware baselines. Every one of those is another thing that can be wrong at handover, and another reason a two-hour commissioning can become a six-hour one.

Standby consumption is real. A hybrid sitting idle overnight draws something. Check the datasheet's night-time consumption figure and multiply it by 8,760 hours before you tell a customer it's free to leave on.

Replacement is the expensive box. When the hybrid fails out of warranty, you're replacing the most expensive single component on the wall, not a £400 string inverter.

Heat and noise. A 10kW hybrid under load is not silent and it is not cold. Putting it in an understairs cupboard because the cable run was easier is a decision the homeowner will remember every evening.

Firmware dependency. More features mean more code. More code means more updates. If your installer doesn't have a post-handover update policy, find one who does.

None of that makes hybrids bad. It makes them a trade. If your client wants one box, one app, one warranty and a battery later, a hybrid is the right call. If they want resilience and component-level replacement, a split system usually wins. I'd rather spend twenty minutes explaining that than have the conversation at handover.

Before you buy a GoodWe inverter, do these five things

If this article is being read by someone about to buy a GoodWe inverter, this is the part worth screenshotting.

  1. Buy through an authorised distributor, not a marketplace listing. Warranty registration depends on it, and grey imports don't get firmware support.
  2. Put the accessory list in the PO. Meter part number, firmware baseline, grid-code profile, comms module, CT ratio. Ours is twelve lines now.
  3. Confirm the grid-code profile is loaded before dispatch. Ask for a photo of the commissioning card. It takes the distributor two minutes and saves you a site visit.
  4. Ask who performs firmware updates after handover, and how. If the answer is the homeowner via the app, get that in writing.
  5. Check the lead time against your commissioning date, not your delivery date. Those are different dates and the gap is where projects die.

What the £4,600 actually bought

It bought a protocol. Twelve-item goods-in checklist, signed by whoever opens the box. Pre-shipment photo of the label and the accessory pack. A quote template for EV chargers with fourteen line items so three quotes are finally comparable. And a two-page customer explainer on hybrid trade-offs that goes out before the contract, not after.

It also bought me a bit of humility. I'd spent two years telling anyone who'd listen that standardising on one ecosystem would eliminate these problems. It didn't. It changed them from which brand is at fault to which line on the PO is wrong, which is a better class of problem, but it's still a problem.

An informed customer asks better questions and makes faster decisions. That's the whole reason I write these things down. Not because I got it right — because I got it wrong in a warehouse at 7:40 in the morning, and the invoice is still in my drawer.

Previous: Why I Pay Extra for Delivery Certainty on Emergency Solar Builds (Even When the MPPT Is 'In Stock')Next: Why I Stopped Buying Generic MPPT Controllers — And Why epever Isn't Right for Every Site