Project Note · 2026-11-10

The EV Charger Installation Problem I Didn't See Coming (and What It Taught Me About Buying Renewable Equipment)

An office purchasing admin's honest breakdown of why adding employee EV charging isn't the simple buy it looks like — from 4x4 post side mounting brackets to transformer load calculations and the brand-ecosystem trap.

I'm the office administrator for a 180-person company. I handle all the purchasing that doesn't go through engineering — roughly $340,000 a year across about 14 vendors. I report to both operations and finance, which means I get blamed from both directions.

Last spring (2024) we decided to add EV charging for employees. Four spots, nothing fancy. I figured it was basically a big appliance purchase: pick a brand, order the units, hire an electrician, done.

Six months and one revised budget later, I know better. And the thing that burned me wasn't the charger price. It was everything around it that nobody puts on the quote sheet.

The part everyone thinks is the hard part

Here's what most buyers focus on: the charger itself. Which brand, how many, what's the price per unit. If you'd asked me in March, I'd have told you the whole project was about choosing between a ChargePoint Level 2 charger and an ABB EV charging station and calling it a day.

Every sales rep I talked to wanted to talk about the unit. Charging speed, app features, warranty length. Useful stuff. But it's the obvious 20%. The other 80% is where the money actually goes.

Most buyers focus on the per-unit price and completely miss the site conditions, the electrical capacity, and the mounting hardware. I know because I was that buyer.

Where it actually gets complicated

1. The mounting detail that isn't a detail

I ordered four Level 2 pedestals. Then the electrician showed up and asked where the 4x4 post side mounting brackets were.

I'm sorry — what?

Turns out you don't just plant a charger in the ground. Depending on your site, you're using a pedestal, a wall mount, or a 4x4 post with a side mounting bracket. The bracket sounds like a $30 accessory. But if you order the wrong mount for your post — or no post at all — you're stuck. Our site already had 4x4 posts from an old lighting setup, so the side-mount bracket was the right call. I just didn't know that until the contractor made a second trip.

If I remember correctly, that second visit alone was around $450 in labor and about a week of delay. Not catastrophic. Just annoying, and entirely avoidable.

2. The transformer you didn't budget for

Here's the one that actually scared me. Four Level 2 chargers at roughly 7–11 kW each pull a lot more than people assume. Our building had an older transformer — an ABB unit that had been in place for years and was, honestly, doing fine for the load it was designed for.

The question everyone asks is "how much is the charger?" The question they should ask is "does my existing service have the capacity, and if it doesn't, what's the lead time on a new transformer?"

We paid an electrical engineer to run a load calculation. It came back close to our limit. Not over — close. We ended up not replacing the transformer, but we had to add load management so the chargers throttle during peak building demand. That's a software and settings fix, not a hardware swap, but it isn't free and it isn't obvious from a spec sheet.

If we'd needed a new transformer, the lead time would have been a separate project entirely. Commercial transformer orders can run into months depending on spec and supplier. That's the kind of thing that takes a simple purchase order and quietly turns it into a capital project.

3. The brand-ecosystem trap

This one is subtle. ChargePoint leans heavily on software and network management — so their Level 2 charger installation is really about plugging into their platform. ABB, on the other hand, is known for hardware: the Terra AC Wallbox, their broader EV charging stations, transformers, and power gear.

Both are good products. But they're not the same purchase. If your quote comes from a network provider, you're partly paying for a subscription and a service. If it comes from a hardware brand, you're paying for the box and then figuring out the software layer separately.

I almost signed a three-year network contract before realizing the building's existing ABB transformer and switchgear didn't need replacing — the contract was for a completely different layer of the stack. Nothing wrong with it. But I was one signature away from paying for something I hadn't scoped.

4. The "I thought this was simple" myth

Somewhere around week three, I went down a rabbit hole trying to answer a question that had nothing to do with my project: who created wind turbines?

I'd assumed wind turbines were a modern invention — a 1990s thing. Not even close.

Charles F. Brush built the first automatically operated wind turbine for electricity in 1888 in Cleveland, Ohio. It charged batteries. Poul la Cour in Denmark did similar work in the 1890s. This has been an engineering discipline for well over a century.

Why does that matter to an EV project? Because the "this is simple" thinking comes from an era when it kind of was. The earliest chargers were basically 240V outlets with a fancy box. Today you're dealing with load management, network protocols, code requirements (NEC Article 625, if you want to look it up), and a supply chain for components as unglamorous as a mounting bracket.

Renewable energy equipment has been engineered for generations. Treating any part of it as a "just buy it" decision is how you end up with a second electrician visit and a grumpy VP.

What it costs when you skip this stuff

None of these are catastrophic on their own. That's exactly what makes them dangerous.

  • A wrong or missing mounting bracket: a few hundred dollars in rework and a delay.
  • A transformer load miscalculation: potentially months of lead time, engineering fees, and a budget conversation you don't want to have.
  • Buying the wrong layer of the software stack: a multi-year contract you can't unwind without a penalty.
  • Any of the above landing during a project review: a hit to your credibility with the people who sign off on next year's purchases.

The worst one for me was the third. I didn't lose money on the network contract because I caught it in time. But I did spend about two weeks — or rather, closer to three once finance got involved — re-explaining the project because the original number I gave them was wrong. Dodged a bullet on the money, took a hit on the trust.

And this is where the small-order thing bit me. My project was four chargers. To a large vendor that's a rounding error. Two contractors I called basically told me the job was too small to be worth scheduling. The one who took me seriously — a smaller local firm — was the one who caught the mounting issue before it turned into a third trip.

I've learned to notice that. Small doesn't mean unimportant — it means potential. The vendors who treat your $9,000 order the way they'd treat a $90,000 one are the ones you keep.

What I'd do differently

I wouldn't skip the unit research — brand, features, and warranty all matter. But I'd flip the order of operations:

  1. Get a load calculation first. Have an engineer check whether the existing transformer and service can handle the added load. Price out load management if you're close to the limit. This one step would have saved me two weeks.
  2. Confirm the mounting type before ordering anything. Pedestal, wall, or 4x4 post with side bracket — get it in writing from the contractor, not just the catalog.
  3. Pick your layer before your brand. Are you buying hardware or a network? Decide that first, then the brand follows.
  4. Take the small-quote vendors seriously. The one who returns your call on a small job is probably the one who'll answer when the job is bigger.

None of this is exotic. It's just the part of the project that never shows up on a spec sheet — and, in my experience, it's the part that actually decides whether the install goes smoothly.

The chargers work. Employees like them. But the next time someone asks me to "just order some EV chargers," I'm going to ask three questions before I open a purchase order: What's the load? What is it mounting to? And who's going to still pick up the phone when the order is small?

Previous: I Almost Rejected 620 LG Energy Solution ESS Batteries Over a Detail That Wasn't a DefectNext: Growatt 3kW Inverter: 3 Mistakes That Cost Me $1,880